Petmate High Back Litter Pan Liners: Installation Tips

Quick answer

Installing Petmate High Back Litter Pan Liners is straightforward: fit the liner snugly into the pan, secure it with the built-in twist ties, and avoid overfilling with litter. This keeps changes clean and reduces mess.

Installation steps

1. Step 1: Prepare the pan: Remove all old litter and clean the empty pan thoroughly. Dry it completely so the liner adheres well to the bottom and sides. A damp pan can cause the liner to slip or tear when you add litter.
2. Step 2: Fit the liner: Open the liner and drape it over the pan, pressing it into the corners and up the high back. Smooth out any wrinkles or air pockets to ensure a snug fit. Wrinkles create weak spots where litter can leak through. Take an extra moment to flatten them.
3. Step 3: Secure with twist ties: Wrap the twist ties around the edges of the pan, cinching the liner in place. Do not overtighten—leave a little slack so the liner can flex when your cat steps in. Overtightening can tear the liner at the tie points. A gentle snug is enough.
4. Step 4: Add litter: Pour in a moderate layer of litter—about 2–3 inches deep. Avoid overfilling, because too much weight can pull the liner loose from the pan edges. Check the liner after adding litter: if it has slipped, reposition it before your cat uses the box.
5. Step 5: Dispose and replace: When it's time to change, gather the liner edges, twist the top, and secure with the attached ties. Lift the bag out and discard. No scraping or scrubbing needed. Double-check that the ties are tight before lifting to avoid spills.

Product details

• Petmate High Back Litter Pan Liner Large 12 Ct: These durable disposable liners fit compatible large Petmate® litter pans and include convenient twist ties for quick, mess-free disposal. The twist ties let you seal the used liner into a tidy bag, so you don't have to touch the soiled litter or worry about leaks during disposal.